Many customers ask me how to use NitroOBD2 Performance Chip Tuning Box? once i plug the device on cars, have light flsh?
now, we will list some customer feedback, maybe you know more about the using method.
What is NitroOBD2 Chip Tuning Box?
NitroOBD2 Chip Tuning Box works based OBD2 protocols as remaping the Car’s computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car, according to the drivers’ habits and always keeps remaping the ECU to increase the performance of engine.
NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine.
NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are of high quality.
How to install NitroOBD2?
1 – Pull the ignition key.
2 – Find the OBD2 plug and connect the device NitroOBD2
3 – Insert the key into the ignition and turn to the first position. (Do not start the engine)
4 – Press the button on the device NitroOBD2 for 5 seconds. Wait 30-54 seconds. (device will communicate with the computer of the vehicle)
5 – Start the engine
6 – NitroOBD2 recognize your car and driving habits after about 200km drive and thus adapt perfectly to the vehicle.
Where to locate OBD2 connector?
1 Driver’s side, underneath dasboard, in the area under the steering column,
2 Driver’s side, underneath dasboard,between the driver-side door and steering column area
3 Driver’s side, underneath dasboard, between the steering column area and the center console
4 Driver’s side, dashboard instrument/gauge area, between the steering column and center console
5 Driver’s side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.